butte_county_wordmark_PW_Size_2.5.jpg

This recruitment is for Level II and III.

The salary range for level II is $1,835.20 - $2,459.20 biweekly ($22.94 - $30.74 per hour).

The salary range for level III is $1,928.80 - $2,584.80 biweekly ($24.11 - $32.31 per hour).

FLSA: Non-Exempt

DEFINITION

Under immediate (Heavy Equipment Mechanic I) or general (Heavy Equipment Mechanic II) supervision or direction (Heavy Equipment Mechanic III), inspects, maintains, repairs, troubleshoots and services vehicles and heavy and light road maintenance and construction equipment; operates a variety of hand, power, and shop tools; prepares and maintains records of service and repairs and time and materials used in each project; and performs related duties as assigned.

SUPERVISION RECEIVED AND EXERCISED

Receives immediate (Heavy Equipment Mechanic I) or general (Heavy Equipment Mechanic II) supervision of direction (Heavy Equipment Mechanic III), from assigned supervisory or management personnel. Exercises no direct supervision over staff.

CLASS CHARACTERISTICS

Heavy Equipment Mechanic I: This is the entry-level classification in the Heavy Equipment Mechanic series. Initially under close supervision, incumbents learn and perform routine maintenance and repair of a wide variety of motorized equipment. As experience is gained, assignments become more varied and complex; close supervision and frequent review of work lessen as an incumbent demonstrates skill to perform the work independently. Positions at this level usually perform most of the duties required of the positions at the Heavy Equipment Mechanic II level but are not expected to function at the same skill level and usually exercise less independent discretion and judgment in matters related to work procedures and methods. Work is usually supervised while in progress and fits an established structure or pattern. Exceptions or changes in procedures are explained in detail as they arise.

Heavy Equipment Mechanic II: This is the working-level classification in the Heavy Equipment Mechanic series. Positions at this level are distinguished from the Heavy Equipment Mechanic I level by the performance of the full range of duties as assigned, working independently, and exercising judgment and initiative. Positions at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies of the work unit.

Heavy Equipment Mechanic III: This is the fully qualified journey-level classification in the Heavy Equipment Mechanic series responsible for performing the more complex work assigned to the series. Incumbents regularly work on tasks which are varied and complex, requiring considerable discretion and independent judgement. Positions in the classification rely on experience and judgement to perform assigned duties. Assignments are given with general guidelines and incumbents are responsible for establishing objectives, timelines, and methods to deliver services. Work is typically reviewed upon completion for soundness, appropriateness and conformity to policy and requirements. Positions at this level are distinguished from the Heavy Equipment Mechanic II level by independently troubleshooting and performing the more complex vehicle and equipment repairs and maintenance, including special project builds.

This class is distinguished from the Senior Equipment Mechanic in that the latter performs the most complex work assigned to the series, such as the most difficult troubleshooting and repair work and provides technical and functional direction over lower-level staff.

Positions in the Heavy Equipment class series are flexibly staffed; positions at the II- and III-levels may be filled by advancement from the I- and II-levels, respectively; progression to the next level in the series is dependent on (i) management affirmation that the position is performing the full range of duties assigned to the classification; (ii) satisfactory work performance; (iii) the incumbent meeting the minimum qualifications for the classification including any licenses and certifications; and (iv) management approval for progression to the next level in the class series.

EXAMPLES OF TYPICAL JOB FUNCTIONS

Typical functions may include any of the following tasks, knowledge, abilities, and other characteristics. The list that follows is not intended as a comprehensive list; it is intended to provide a representative summary of the major duties and responsibilities. Incumbent(s) may not be required to perform all duties listed, and may be required to perform additional, position-specific tasks.

Some duties, knowledge, skills, and abilities may be performed in a learning capacity for entry-level (I Level) positions.

Utilizes computerized diagnostic equipment, troubleshoots, inspects, diagnoses and performs skilled maintenance and repair of various types of vehicles and equipment with gasoline and diesel engines.
Performs skilled maintenance and repair of heavy-duty diesel trucks and road construction heavy equipment such as motor-graders, loaders, backhoes, tractors and various asphalt paving equipment, and snow removal equipment.
Replaces various types of brake system components such as brake shoes, disc brake pads, machines drums and rotors and related brake maintenance work.
Diagnoses, maintains, and repairs hydraulic and air-brakes systems, replaces air brake components i.e., brake pots/air chambers, linings, pads, air lines and valves and related components.
Diagnoses, repairs, rebuilds, and maintains various hydraulic operating systems, pumps, valves, hose fabrication and cylinders and related components.
Diagnoses and repairs driveline components such as drive shafts, clutch assemblies, universal joints, and related components.
Repairs and maintains manual and automatic two-wheel drive and four-wheel drive transmissions, differentials, and related components.
Installs, replaces and repairs of various special emergency warning equipment, including law enforcement and public works vehicle warning lights, beacons, strobe lamps, 2-way radios and related components, special vehicle interior cages, barricades and law enforcement specialty seats or other special vehicle requirements.
Performs cooling system flush using automated machine and additives.
Diagnoses, maintains. and repairs various steering systems, hydraulic and electric assist types.
Diagnoses and repairs electrical systems, starting systems, charging systems, cooling systems, heating and air conditioning systems and general control systems.
Diagnoses, maintains and/or repairs engine lubrication and fuel systems, electrical functions and emission control devices including computer diagnostics and test equipment operations.
Disassembles and overhauls engines, differentials, transmissions, clutches, alternators, generators, starters, distributors, carburetors, steering mechanisms, brakes, hydraulic apparatus, and other assemblies.
Conducts detailed safety inspections and reports on status in accordance with regulations stipulated.
Designs, fabricates, and installs repair parts for vehicles and/or equipment.
Conducts road tests and quality control checks of repairs as required.
Performs emergency road calls and field repairs as required.
Lubricates vehicles, trucks and other equipment.
Performs engine tune-ups, brake and tire repairs and replacement.
Troubleshoots and performs road repairs on vehicles and equipment.
Reads and interprets manuals, drawings, schematics, troubleshooting guides and specifications provided from manufacturer, both in print and via software media.
Makes oral and written reports of work performed; completes forms and keeps accurate maintenance records.
Uses and maintains a full set of mechanic tools, hand and power tools, diagnostic test equipment and all shop tools.
Bend, cut, weld, build, modify and fabricate metals.
Maintains shop and work areas in a clean and orderly condition and keeps facility secure.
Observes safe work methods and utilizes safety equipment and personal protective equipment; properly handles and disposes of hazardous materials.
Prepare new vehicles and equipment for service
Performs related duties as assigned.

Some duties, knowledge, skills, and abilities may be performed in a learning capacity for entry-level (I Level) positions.

Knowledge of:

Applicable federal, state, and local laws, codes, and ordinances relevant to the area(s) of responsibility.
Operation and maintenance of a variety of hand, power, and shop tools and equipment common to the field, including electric arc and gas welding equipment.
Techniques, methods, materials, tools, and equipment used in the overhaul, repair and maintenance of general vehicles and equipment in course of duty assignments.
Safe work methods and safety regulations pertaining to the work.
Troubleshoot and determine appropriate action in the maintenance and repair of equipment.
Basic mathematical principles
Techniques for providing a satisfactory level of customer service by effectively dealing with the public, vendors, contractors, and County staff.
The structure and content of the English language to effectively perform the work.
Modern equipment and communication tools used for business functions and program, project, and task coordination, including computers, diagnostic tools and software programs relevant to work performed.

Ability To:

Identify scheduled maintenance required on equipment.
Diagnose, troubleshoot and repair a wide variety of light and heavy equipment, vehicles, and equipment.
Operate and maintain a variety of hand, power, and shop tools and equipment used in the work.
Estimate necessary materials and equipment to complete assignments.
Read and interpret manuals, specifications, and drawings.
Read and interpret hydraulic and electrical schematics and fabrication blueprints.
Maintain accurate logs, records, and basic written records of work performed.
Make accurate arithmetic calculations.
Repair wiring and electrical repairs
Independently organize work, set priorities, meet critical deadlines and follow-up on assignments.
Use tact, initiative, prudence and independent judgment within general policy and procedural guidelines.
Effectively use computer systems, software applications relevant to work performed and modern business equipment to perform a variety of work tasks.
Communicate clearly and concisely, both orally and in writing, using appropriate English grammar and syntax.
Establish, maintain, and foster positive and effective working relationships with those contacted in the course of work.

Education and Experience:

Any combination of training and experience that would provide the required knowledge, skills, and abilities is qualifying. A typical way to obtain the required qualifications would be:

Equivalent to completion of the twelfth (12th) grade; and

Heavy Equipment Mechanic I: Two (2) years of experience in the maintenance and repair of vehicles and/or heavy construction equipment.

Heavy Equipment Mechanic II: Two (2) years of experience in the maintenance and repair of vehicles and/or heavy construction equipment at a level equivalent to the County’s class of Mechanic I.

Heavy Equipment Mechanic III: Three (3) years of experience in the maintenance and repair of vehicles and/or heavy construction equipment at a level equivalent to the County’s class of Mechanic II.

Certifications and Licenses:

Must possess a valid US driver’s license upon date of application. Must obtain California driver’s license following hire date per California DMV regulations.
Heavy Equipment Mechanic II: Within one year, following hire date, must possess and maintain a valid California class A driver’s license with air brake, tanker, and standard transmission endorsement.
Heavy Equipment Mechanic III: Must possess and maintain a valid California class A driver’s license with air brake, tanker, and standard transmission endorsement.

PHYSICAL DEMANDS

Mobility to work an automotive shop setting; to sit, stand and walk on level, uneven or slippery surfaces; frequently reach, twist, turn, kneel, bend, stoop, squat, crouch, grasp and make repetitive hand movement in the performance of daily duties; to climb, on, over and around equipment to service and repair; to operate varied hand and power tools and construction equipment and to operate a motor vehicle and visit various County sites.
Strength and stamina to perform medium to heavy physical work; to lift, carry, push, and pull materials and objects averaging a weight of 30 pounds or heavier weights, in all cases with the use of proper equipment and/or assistance from other staff.
Vision to inspect and operate equipment.
Finger dexterity to operate and repair tools and equipment.
Wear and use proper Personal Protective Equipment (PPE).

WORKING CONDITIONS

Field work with exposure to loud noise levels, cold and hot temperatures, inclement weather conditions, road hazards, vibration, confining workspace, chemicals, mechanical and/or electrical hazards, toxic/poisonous substances, biologic/infectious agents, unpleasant odors, hazardous physical substances and fumes, dust, and air contaminants.
Employees may interact with upset staff and/or public and private representatives in interpreting and enforcing departmental policies and procedures.

EQUIPMENT AND TOOLS UTILIZED

Equipment utilized includes personal computer, fax machine, standard office equipment, hand and power tools, welding equipment, pneumatic tools, county vehicles, loader, forklift, tire changing and balancing machine, overhead crane, and vehicle lifts.

Disaster Service Worker

All Butte County employees are designated Disaster Service Workers through state and local law (California Government Code Section 3100-3109). Employment with the County requires the affirmation of a loyalty oath to this effect. Employees are required to complete all Disaster Service Worker related training as assigned, and to return to work as ordered in the event of an emergency.

Butte County

New Jobs

Heavy Equipment Mechanic II/III